Improving Office WiFi Coverage and Network Stability in Johor
Amin Rosli
September 2, 2026
Previous Project
The client approached Neera Technologies because their existing CCTV setup no longer provided the coverage they needed. Several areas inside and around the store were difficult to monitor, and the client wanted a more reliable setup for daily security monitoring.
CCTV System
Retail
Johor
[Project Hero Image]
Industry
Retail
Location
Johor
Service
CCTV System
Project Type
CCTV Upgrade & Installation
Project Scope
Site assessment, CCTV coverage planning, camera replacement, additional camera installation, configuration and testing.
The client already had a CCTV system installed, but the existing setup was no longer suitable for the way the store was operating.
Some areas had limited visibility, while certain camera angles were no longer useful due to changes in the store layout. The client also wanted better monitoring around key areas such as the entrance, cashier area and selected sections of the premises.
Instead of replacing everything without a proper plan, the client wanted a solution that could improve coverage while making use of the existing setup where possible.
Some parts of the store were not properly covered by the existing CCTV system.
A few cameras were installed at angles that no longer matched the current store layout.
Key areas such as the entrance, cashier area and selected customer zones required clearer monitoring.
The upgrade needed to work around the existing cabling and CCTV equipment where possible.
The client did not simply need more cameras.
They needed a more practical CCTV setup that matched how the store was actually being used.
Before recommending any equipment, Neera Technologies carried out a site assessment to understand the current CCTV setup and how the store operated on a daily basis.
We reviewed the existing camera locations, identified areas with limited coverage and looked at which parts of the current system could still be used effectively.
This helped us avoid unnecessary replacement and allowed us to focus the upgrade on areas that actually needed improvement.
The goal was not to install the highest number of cameras.
The goal was to create a more useful CCTV setup for the client.
Based on the site assessment, we recommended a CCTV upgrade focused on improving coverage and camera placement.
Where suitable, existing cameras were repositioned to provide better visibility based on the current store layout.
Additional cameras were introduced in areas that could not be adequately covered by the existing setup.
Camera placement was planned around important monitoring points such as the entrance, cashier area and selected sections of the retail floor.
After installation, the system was configured and tested to make sure all cameras were recording and displaying the intended areas correctly.
Because the store was already operating with an existing CCTV system, the project required more than simply replacing old cameras with new ones.
We had to identify which parts of the existing system were still suitable and which areas required improvement.
Camera positions had to be adjusted based on the current layout of the store rather than the original installation.
The work had to be carried out while minimising disruption to the client’s business operations.
Each camera angle had to be reviewed to make sure the final setup provided useful coverage, not just a working video feed.
We reviewed the existing CCTV system, store layout and current camera coverage.
We identified blind spots and key areas that required better monitoring.
Existing cameras were repositioned where suitable, while additional cameras were installed where needed.
The CCTV system was configured and tested to make sure each camera was recording the intended area properly.
The client was guided through the updated system and final camera coverage.
[Gallery Image]
Camera repositioned to provide improved visibility across a key retail area.
[Gallery Image]
Additional CCTV coverage installed to reduce an existing blind spot.
[Gallery Image]
Camera placement planned around the store’s current operational layout.
[Gallery Image]
Final CCTV setup after installation and configuration.
The upgraded CCTV system gave the client better visibility across important areas of the store and improved the overall usefulness of the existing security setup.
More of the store can now be monitored effectively.
Areas with limited visibility were improved through better camera positioning and additional coverage.
Important areas such as entrances and transaction points now have more practical CCTV coverage.
Suitable parts of the existing system were retained instead of being replaced unnecessarily.
“[Insert actual client testimonial here.]”
— [Client Name / Company]
Hide this section if no genuine testimonial is available.
Upgrading a CCTV system does not always mean replacing everything.
Sometimes, the bigger issue is not the camera itself, but how the system is planned and positioned.
By reviewing the client’s existing setup first, Neera Technologies was able to focus the upgrade on the areas that actually needed improvement.
Already have CCTV installed, but still dealing with blind spots, poor camera angles or limited coverage?
Neera Technologies can assess your existing CCTV system and recommend practical improvements based on your actual premises and monitoring requirements.
[Discuss Your CCTV Requirements]
[View Our CCTV Solutions]
[Short description]
View Project →
[Short description]
View Project →
[Short description]
View Project →
CCTV solutions planned around your premises, monitoring requirements and existing setup.
Learn More →
Practical security solutions for businesses that need better visibility and protection.
Learn More →
Supporting the network infrastructure behind connected security and monitoring systems.
Learn More →
